Dr.-Ing.  Kai Wolter

Dr.-Ing. Kai Wolter

Kai Wolter M. Sc.

Field of Research

  • Methods and processes in the development of drive systems
  • Controller synthesis
  • Machine Learning und signal analysis
  • Shifting robot
  • Shifting comfort

Teaching

  • Drive system technologies A and B

Bachelor- / Mastertheses

  • Available bachelor- and master-theses can be found here.

Publications


2022
Model-Based Control Design of an EHA Position Control Based on Multicriteria Optimization
Dörr, M.; Leitenberger, F.; Wolter, K.; Matthiesen, S.; Gwosch, T.
2022. Machines, 10 (12), Art.-Nr.: 1190. doi:10.3390/machines10121190
Validation of Fault-Tolerant Control of Converters under Open-Switch Faults on Connected Test Benches
Pecha, U.; Parspour, N.; Wolter, K.; Waschle, M.; Bause, K.
2022. IECON 2022 – 48th Annual Conference of the IEEE Industrial Electronics Society, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IECON49645.2022.9968422
Considering Functional Safety - supporting the development of automated driving vehicles by the use of Model-Based Systems Engineering
Wäschle, M.; Wolter, K.; Bause, K.; Behrendt, M.; Albers, A.
2022. 17th Annual System of Systems Engineering Conference (SOSE), Rochester, NY, USA, 07-11 June 2022, 275–280, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SOSE55472.2022.9812686
2021
Approach to Automated Testing by Combining Simulations and Bench Tests Conducted on an Electrohydraulic Actuator
Dörr, M.; Karam, M.; Wolter, K.; Leitenberger, F.; Gwosch, T.; Matthiesen, S.
2021. NAFEMS World Congress (NWC 2021)
Validation concept for scenario-based connected test benches of a highly automated vehicle
Wäschle, M.; Wolter, K.; Han, C.; Pecha, U.; Bause, K.; Behrendt, M.
2021. Automatisiertes Fahren 2021. Hrsg.: T. Bertram, 95–109, Springer Fachmedien Wiesbaden
2020
Model-Based Systems Engineering methods to support the reuse of knowledge within the development of validation environments
Mandel, C.; Wolter, K.; Bause, K.; Behrendt, M.; Hanf, M. M.; Albers, A.
2020. 14th Annual IEEE International Systems Conference (SysCon 2020),16. - 17.09.2020, Gera, Institute of Electrical and Electronics Engineers (IEEE)
2018
Potential in customer-specific manual transmission development through the use of neural networks
Wolter, K.; Ruoff, S.; Lutz, S.; Bause, K.; Ott, S.
2018. 12th International Conference & Expo: Automotive Transmissions, HEV and EV Drives (CTI Symposium USA 2018), May 14-17, 2018, Novi, MI
2017
A new approach for the investigation of synchronizations by different shifting characteristics
Albers, A.; Reichert, U.; Wolter, K.; Pinner, T.; Ott, S.
2017. 17th International VDI Congress – Drivetrain for Vehicles, Bonn, Germnay, 5 - 6 July 2017, VDI Fachmedien