Hall of Fame

Completed doctorates

Candidate	Portrait	Topic	Awarded a PhD on
Dr.-Ing. Khalid Abu Snima		Characteristic values and performance limits of wet-running multidisc clutches during continuous slip operation	06.10.2005
Dr.-Ing. Marc Albrecht		Modelling the comfort assessment through the customer’s perspective by example of the automatic start-up	29.04.2005
Dr.-Ing. Alexander Schwarz		Integration of experiment data into the simulation to optimise technical systems on the basis of experiments, time efficiency and multiple objectives	29.11.2013
Dr.-Ing. Thomas Alink		Significance, presentation and formulation of function for solving design problems when using the C&C approach	03.12.2010
Dr.- Ing. Moritz Altner		17.12.2024	Eine Methodik für das technische Änderungsmanagement in der Leitungssatzentwicklung mit dem Modell der SGE – Systemgenerationsentwicklung
Dr.-Ing. Andreas Raimann		Optimising the contact behaviour of electrical contacts in high power connectors	15.03.2015
Dr.-Ing. Asli Arslan-Hürst		Integration of engineering ceramic materials in the function-relevant effective area pair of a clutch	26.01.2005
Dr.-Ing. Martin Augustin		Development of measuring, control and regulatory devices, for a tyre test rig to carry out real-life measuring procedures in real time	20.07.2001
Dr. -Ing. Peter Börsting		Construction barriers in the microsystems technology and ways to overcome them using the functions catalogue	19.10.2012
Dr.-Ing. Michael Basiewicz		Ein Beitrag zur Validierung nasslaufender Lamellen- pakete aus Anfahrelementen von Fahrzeugen im Betriebszustand „geregelter Dauerschlupf	21.02.2020
Dr.-Ing. Matthias Behrendt		Development of a system tribometer to show transient multi-axis stress collectives to analyse the friction and abrasion in mixed frictional areas in the context of wet-running wrapping-CVT	29.05.2009
Dr.-Ing. Hubert Beitler		Investigation on temperature and heat dissipation behaviour of a dry single disc clutch	17.10.2008
Dr.-Ing. Ben Meyer-Schwickerath		Preview during the product development process The Integrated Product Engineering Model (iPeM) as a reference for projections exemplified by the Scenario-Technique and strategic foresight	13.10.2014
Dr.-Ing. Benjamin Hessenauer		Different approaches to the methodical lightweight system design supported by the numeric topology optimisation through dynamic stress	27.03.2014
Dr.-Ing. Jan Berger		Betrachtung der Abbildung und des Einflusses von Restsystemen bei Zweimassenschwungrad-Komponentenuntersuchungen im Kontext des OPEK-X-in-the-Loop-Ansatzes	24.06.2021
Dr.-Ing. Johannes Bernhardt		Development of friction systems using the example of a wet-running multi-disc clutch	28.02.2017
Dr.-Ing. Michael Birkhold		Objectifying comfort and functional assessment as methods to support the development of restart systems in parallel hybrid drive systems	22.02.2013
Dr.-Ing. Jochen Bisinger		Design of the draft processes in the overall automotive research	25.07.2001
Dr.-Ing. Björn Ebel		Modelling a system of objectives for the interdisciplinary product development	30.04.2015
Dr.-Ing. Markus Blust		Efficient screening of the tribological suitability potential of alternative material pairs for the use in tribological contacts of axial piston machines as a contribution to the product development process.	12.01.2017
Dr.-Ing. Martin Bochterle		Methodenbausteine für die empirische Modellierung des Verhaltens technischer Systeme im Rahmen der Produktentwicklung auf Basis linearer Regression	25.04.2022
Dr.-Ing. Manuel Bopp		Ein Beitrag zur Auslegung und Integration vibroakustischer Metamaterialien in komplexe Bauteile am Beispiel von Gehäusestrukturen
Dr.-Ing. Andreas Braun		Model-based support of product development	17.12.2013
Dr.-Ing. Frank Bremer		Derivation of Success Factors for Quantitative Modelling of Embodiment Function Relations in Embodiment Design - A Case Study on Involute Blades	30.05.2022
Dr.-Ing. Friedrich Brezger		New methods to further develop hybrid drive trains to enhance energy efficiency	17.10.2013
Dr.-Ing. Tim Bruchmüller		Realitätsnahe und reproduzierbare Randbedingungen in der Vibrationsanalyse - Ein Ersatzuntergrund für elektropneumatische Bohrhämmer	30.10.2019
Dr.-Ing. Sven Brudniok		Methodological development of highly integrated mechatronic systems exemplified by a humanoid robot	18.09.2007
Dr.-Ing. Nikola Bursac		Model Based Systems Engineering to support modular development in the context of the early phase of product generation development Group: EMM	01.04.2016
Dr.-Ing. Viktoriia Butenko
Dr.-Ing. Rui Cai		Methode zur objektivierten Komfortbeurteilung antriebsstranginduzierter Fahrzeugschwingungen am Fahrzeug-Rollenprüfstand
Dr.-Ing. Ataulmunim Choudhry		Entwicklung einer Methode zur Untersuchung des selbsttätigen Lösens von kombiniert belasteten, hochfesten Mehrschraubenverbindungen am Beispiel der Radschraubenverbindung	27.11.2024
Dr.-Ing. Christian Sander		A new process for the product development to optimise the topology of moving components with particular regard to the inertial force	28.05.2014
Dr.-Ing. Christian Stier		A contribution to the validation of drive systems with regard to fluctuations induced by the clutch or the motor	11.03.2015
Dr.-Ing. Christian Czermin		New material and lubricant concepts for radial plain bearings – experimental determination and application limits	12.08.2000
Dr.-Ing. Markus Döllken		Entwicklung und Evaluation der ACAP-Untersuchungsmethode zur prozessbasierten Validierung von text- und grafikbasierten Konstruktionsmethoden	15.11.2023
Dr.-Ing. Matthias Dörr		Erfassung von Informationen zur Produktnutzung beim Schleifen mit Power-Tools auf Basis von Daten eines Sensormoduls
Dr.-Ing. Katharina Dühr
Dr.-Ing. Olaf Dauber		Elastohydrodynamic rolling friction in steel-ceramic-contacts Drauber was granted an award for his dissertation	01.07.2001
Dr.-Ing. Tobias Deigendesch		Creativity in the product development and pattern as methodological tool	08.12.2009
Dr. -Ing. Markus Dickerhof		Potentials of Acoustic Emission (AE) analysis to monitor and diagnose tribological systems	25.03.2011
Dr.-Ing. Sandra Drechsler		Competency requirements of mechanical engineers with regard to directives, norms and standards for the exercise of their professional activities	26.06.2016
Dr.-Ing. Simon Dylla		Development of a method to objectify the subjectively perceived quality of switching gears with confirmation in vehicles with manual transmission	16.12.2009
Dr.-Ing. Jona Ebertz
Dr.-Ing. Eike Wintergerst		Guideline for the deductive embodiment variation by determining the functional variables in the Product Generation Engineering	03.06.2015
Dr.-Ing. Martin Eisele		Entwicklungsbegleitende Validierungsumgebung für das Design von Kühlkonzepten in der frühen Phase der Batteriemodulentwicklung	02.07.21
Dr.-Ing. Matthias Eisenmann		Validation Navigator – a referenceprocess for validation studies on effects of design methods Band	26.09.2022
Dr.-Ing. Dieter Emmrich		Development of a FEM-based method to design reinforcing beads in the construction process for supporting structures under bending stress	09.12.2004
Dr.-Ing. Hans-Georg Enkler		A computer-aided concept of mechanic parts with strongly dispersive supporting structures exemplified by primary shaping of heavy-duty micromechanical systems	23.04.2010
Dr.-Ing. Florian Eppler		Development of Methods to Design a Robust Anti-Judder Control Using the Example of Vehicles Featuring a Dry Double Clutch	25.07.2018
Dr.-Ing. Joshua Fahl
Dr.-Ing. Jan Fischer
Dr.-Ing. Jannick Fischer
Dr.-Ing. Hendrik Frank		Development of complex mechatronic systems by example of a modular linear drive system	16.12.2004
Dr. -Ing. Markus Frietsch		A contribution to the efficient use of Reinforcement Learning to control non-linear systems exemplified by a twin-axle robot	18.11.2011
Dr.-Ing. Martin Fritz		Methodological development of model-based monitoring functions of mechatronic systems in automotive engineering by example of an electro-mechanic wheel brake actuator	30.01.2004
Dr.-Ing. Thomas Götze		The parallel powertrain transmission – a modified dual clutch transmission with improved recovery potential	18.10.200
Dr.-Ing. Thomas Günther		Method to optimise of motor durability programmes as part of the validation processes on the basis of equally damaging substitution collectives exemplified by the AI-Si-cylinder head	22.07.2010
Dr.-Ing. Rene Germann		Ein Beitrag zur störgrößenreduzierten Erfassung und Beurteilung der Anwendungseignung im Kontext der nutzerzentrierten Produktentwicklung von Power-Tools	18.07.2019
Dr.-Ing. Bartosz Gladysz		Gestalt- und wirkzusammenhangbasierte Beschreibung von Fehlermechanismen für eine effektivere und effizientere Identifikation, Analyse sowie Nachvollziehbarkeit von Fehlerfolgen und -ursachen	16.04.2019
Dr.-Ing. Patric Grauberger		EnhanCE Modelling – method training for teaching and researching qualitative modelling with the Contact and Channel Approach	28.03.2022
Dr.-Ing. Thomas Gwosch		Antriebsstrangprüfstände zur Ableitung von Konstruktionszielgrößen in der Produktentwicklung handgehaltener Power-Tools	20.03.2019
Dr.-Ing. Dipl.-Phys. Pascal Häussler		A new process to optimise the form of dynamically stressed components in mechanical without parameters, but on the basis of lifetime evaluations and hybrid multi-body systems	25.11.2005
Dr.-Ing. Kevin Hölz
Dr.-Ing. Sebastian Hünemeyer		Entwicklung einer Systematik zum voausschauenden und datengestützten Spezifizieren von Anzeige- und Bedienkonzepten in der Frühen Phase im Modell der SGE - Systemgenerationsentwicklung	29.08.2024
Dr.-Ing. Jochen Hauschild		Developing a new method to determine and verify the parameters for heat transfer in CFD simulations of dry clutch systems	16.12.2015
Dr.-Ing. Stefan Hauser		Concepts to validate geometrical properties of micro gears and micro gear tooth systems	17.12.2007
Dr.-Ing. Daniel Heinrich		Modelling of the driver behavior to determine the component load for automotive powertrains	01.02.2016
Dr.-Ing. Nicolas Heitger		Methodische Unterstützung der initialen Zielsystembildung in der Automobilentwicklung im Modell der PGE – Produktgenerationsentwicklung	30.04.2019
Dr.-Ing. Daniel Herbst		Investigating the suitability of a new procedure to produce hydrogen using silicon for the use in vehicles	16.05.2003
Dr.-Ing. Jan Holoch
Dr.-Ing. Sebastian Horn
Dr.-Ing. Serhan Ili		Open Innovation in the context of integrated product development strategies to enhance the R&D productivity	09.01.2009
Dr.-Ing. Bernd Ilzhoefer		Investigation to optimise helical compression springs	21.05.2004
Dr.-Ing. John Köber		Ein Beitrag zur effizienteren Validierung der Applikation von Doppelkupplungsgetrieben im Kontext des IPEK-X-in-the-Loop-Ansatzes	27.06.2023
Dr.-Ing. Stephan Köhne		Measurement of forces and movements of profiled tyres in the contact area on a drum test rig during real-life velocities	07.02.2002
Dr.-Ing. Carel Karrar		A contribution for developing, dimensioning and checking of dry-running clutches and brakes in powertrain systems in order to avoid friction oscillations	25.05.2009
Dr. -Ing. Simon Kelemen		Potentials of the acoustic emission (AE) analysis to characterise dry-running friction systems	02.07.2012
Dr. -Ing.Thomas Kernstock		A contribution to the targeted reduction of the NVH phenomenon Gear Rattling during the complete vehicle development process exemplified by a dual clutch transmission	03.05.2012
Dr.-Ing Bastian Killer		KVP-cooperation in the vehicle development, assessment and successful implementation of OEM-intern improvements into other OEMs on the basis of Integrated Product Engineering Model (iPeM)	07.05.2013
Dr.-Ing. Simon Klingler		A method for efficient and effective support of continuous validation in the context of PGE product generation development.	30.01.2017
Dr. -Ing. Thomas Klotz
Dr.-Ing. Jonas Kniel		Potentials of temperature distribution measurement for the analysis of dry-running friction systems based on new measurement technology	18.12.2017
Dr.-Ing. Christian Koch		Eine Methode zur optischen Messung der Federbewegung in Torsionsdämpfersystemen	28.02.2019
Dr.-Ing. Arne Krüger		Clutch grabbings – causes, influences, countermeasures	13.11.2003
Dr.-Ing. Armin Kurrle		End-to-end documentation of distributed target systems in product development by using semantic meta information using the example of Connected Car	18.12.2017
Dr.-Ing. David Landes		16.03.2022
Dr.-Ing. Leif Marxen		A Framework for Design Support Development based on the integrated Product Engineering Model iPeM	15.05.2014
Dr.-Ing. Sarawut Lerspalungsanti		A contribution to shaping the human perception of comfort and assessment of NVH-properties in the powertrain development on the basis of artificial neural networks	01.02.2010
Dr.-Ing. Pablo Leslabay		Optimisation based on robustness for mechanical systems with wide dispersion of relevant system and element sizes.	05.11.2009
Dr.-Ing Andreas Lindenmann
Dr.-Ing. Marco Lochmahr		Methode zur interdisziplinären Analyse und Optimierung von Hinterachssystemen im Spannungsfeld Fahrdynamik, Fahrkomfort und NVH am Beispiel der Raumlenkerachse und des Teilsystems Fahrschemellager im Kontext XiL	13.06.2018
Dr.-Ing. Quentin Lohmeyer		Person-focussed modelling of product development systems with particular regard to synthesis and analysis of dynamic systems of objectives	11.01.2013
Dr.-Ing. Benoit Lorentz		An approach to investigate the influences on surface roughness with lubricated and dry contacts using the Finite Element Method	28.05.2013
Dr.-Ing. Ludwig Maul		Network creativity – A person-orientated design and the integration of a community platform for innovative impulses	23.06.2015
Dr.-Ing. Ralph Lux		Integral powertrain development through integration of simulation and test	25.07.2000
Dr.-Ing. Ottmar Müller		Development of system-based component optimisation to support integrated analysis methods in the product development process	14.07.2005
Dr. -Ing. Thomas Maier		A contribution to create complex structurally dynamic simulation models and their validation using 3D Laser Vibrometry	25.11.2011
Dr. mult. Hansjörg Maier		Analysis and optimisation methods for aggregate storage system to improve the driving comfort	10.11.2006
Dr. -Ing. Patrick Maier		Development of a method to objectify the subject perception of vehicle oscillations caused by the powertrain	19.10.2011
Dr.-Ing. Constantin Mandel		Entwicklung einer Model-Based Systems Engineering Methodik zur Unterstützung der Validierung im Produktentstehungsprozess	17.05.2024
Dr.-Ing. Sebastian Mangold		Erfassung heterogener passiver Anwendereigenschaften und deren Abbildung in einem einstellbaren Hand-Arm-Modell am Beispiel eines Impulsschraubers	24.09.2019
Dr.-Ing. Florian Marthaler		Zukunftsorientierte Produktentwicklung - Eine Systematik zur Ableitung von generationsübergreifenden Zielsystemen zukünftiger Produktgenerationen durch strategische Vorausschau	23.04.2021
Dr.-Ing. Jochen Marz		Micro-specific product development process (µPEP) for tool-specific micro technologies	25.04.2005
Dr.-Ing. Dipl.-Kfm. Kevin Matros		Development of hybrid drive systems on the basis of the pull-principle of validation and the IPEK-X-in-the-Loop-approach	23.06.2016
Prof. Dr.-Ing. Mirko Meboldt		Holistic modelling of the product development process – from mental concepts to the workflow with handling of complex structures – as a contribution to the Integrated Product Engineering Model (iPeM)	25.02.2008
Dr.-Ing. Philipp Merkel		Modelling of the temperature behaviour and experimental investigations of the influence of the friction lining geometry on the friction coefficient behaviour using the example of dry-running friction systems	20.07.2015
Dr.-Ing. Daniel Metz		Development of a simulation-based method to support the design of heavy-duty Primary Shaping of Microsystems	17.03.2008
Dr.-Ing. Michael Mitariu-Faller		Method and processes to develop friction systems with engineers ceramics exemplified by a dry-running vehicle clutch	30.10.2009
Dr.-Ing. Florian Munker		An approach to user-orientated system modelling for the interdisciplinary product engineering process	3.11.216
Dr. -Ing. Sabine Muschik		Development of Systems of Objectives in Early Product Engineering	25.05.2011
Dr.-Ing. Marcus Nüssle		Determining tyre characteristics during real-life driving	10.12.2002
Dr.-Ing. Zequn Nan
Dr.-Ing. Thomas Nelius		Study of the confirmation bias during problem analysis in engineering design and evaluation of a methodical support	29.09.2021
Dr.-Ing. Neven Majic		Development of an FEM-based method to production-based bead pattern designs for support structures under bending stress	24.11.2014
Dr.-Ing. Toan Nguyen		Optimising the variety of lubricants to enhance energy efficiency of hydrodynamic friction bearings using structure-borne noise analysis	17.07.2013
Dr.-Ing. Manuel Niever		Innovation Coaching to promote agility in processes of ASD - Agile Systems Design.	06.04.2023
Dr.-Ing. Lukas Nowicki		Rough surfaces in lubricated tribocontacts	01.07.2008
Dr.-Ing. Jochen Oerding		A contribution for a better understanding of the model for the product development – structuring of systems of objectives using the Contact & Channel-Model (C&C-M)	10.06.2009
Dr.-Ing. Manfred Ohmer		A contribution to synthesis of technical systems on the basis of the Contact & Channel Model C&CM	28.11.2008
Dr.-Ing. Jens Ottnad		Optimising the topology of mechanic parts in dynamic and regulated systems	06.11.2009
Dr.-Ing. Paul Martin		A method to objectify the target figure Energy Efficiency for the definition of a product profile in the context of Design to Energy Efficiency	28.11.2014
Dr.-Ing. Natalie Peglow		Systematik zur Bewertung von Varianten in der Angebotsphase von Common-Rail Pumpen der automobilen Zulieferindustrie auf Basis des Modells der PGE - Produktgenerationsentwicklung	31.03.2021
Dr.-Ing. Tobias Pinner		A contribution to the development of coupling systems for validation in the context of the X-in-the-Loop framework using the example of a switching robot	24.07.2017
Dr.-Ing. Jonas Powelske
Dr.-Ing. Aline Radimersky		Ein Beitrag zur Potenzialausschöpfung von Systemarchitekturmodellen durch methodische Verknüpfung zu Berechnungsmodellen	10.05.2024
Dr.-Ing. Simon Rapp		Beitrag zur empirisch basierten Planung, Steuerung und methodischen Unterstützung von Variationen auf der Basis eines Referenzsystems im Modell der PGE – Produktgenerationsentwicklung	14.04.2021
Dr.-Ing. Stefan Reichert		An approach to investigate surface roughness influence on the running-in behaviour of mixed-lubricated sliding contacts using the finite element method	16.08.2019
Dr.-Ing. Uwe Reichert		Eine Methode zur Auswahl von Standgetrieben für Antriebsstränge von Elektrofahrzeugen mit Zentralantrieb	19.12.2019
Dr.-Ing. Jonas Reinemann		Entwicklung einer Systematik zur Validierung interaktiver Produkte in Augmented-Reality-Umgebungen in der Frühen Phase im Modell der PGE – Produktgenerationsentwicklung
Dr.-Wirt. Ing. Nicolas Reiss		Ansätze zur Steigerung der Methodenakzeptanz in agilen Prozessen der PGE - Produktgenerationsentwicklung	16.07.2018
Dr.-Ing. Thibault Reuschlé		Multi-objective optimization of plug-in hybrid powertrains / Multizieloptimierung von plug-in Hybridantriebssträngen	13.02.2019
Dr.-Ing. Sven Revfi
Dr.-Ing. Thilo Richter
Dr.-Ing. Gerhard Robens		An operation system to scale the simulated passing-by-method using the microphone array technique for an efficient validation in small hemi-anechoic rooms in the vehicle development process	28.02.2013
Dr.-Ing. Anne Ruckpaul		Synthesis-oriented analysis of technical systems in product development – a contribution to properly measure analytical processes during the design process using eye-tracking, for a better understanding of these processes	26.06.2017
Dr.-Ing. Marcus Saak		Development of a concept and of a prototype for a computer-aided tool for the efficient employment of the problem solving methodology “SPALTEN”	25.07.2006
Dr. -Ing. Christian Sauter		A contribution to integrate wikis and social tagging in the product development	02.02.2012
Dr.-Ing. Tobias Schäfer		Ein gesamtsystemischer Ansatz zur simulationsgestützten Analyse und Optimierung eines Bohrhammerschlagwerkes	26.07.2018
Dr.-Ing. Helmut Scherer		Model-based methods for developing systems of objectives and the function-embodiment-relation to support the series development of modular kits exemplified by hybrid-drive train systems	15.07.2016
Dr.-Ing. Fabian Schille		Methode zur generationsübergreifenden NVH-Optimierung des Wiederstartkomforts von Hybridfahrzeugen durch eine manöverbasierte Validierung auf dem Akustikrollenprüfstand	24.07.2019
Dr.-Ing. Hannes Schmalenbach		Ontologies to provide design knowledge exemplified by engineering ceramics	27.07.2013
Dr.-Ing. Andreas Schmid		Beitrag zu rechnergestützten Methoden zur Leichtbaupotenzialerkennung in der Produktgenera-tionsentwicklung – Erkennung potenzieller Integral- und Differenzialbauweisen	10.04.2019
Dr.-Ing. Sebastian Schmidt
Dr. -Ing. Thomas Schneider		Method to create problem solving models on the basis of the SPALTEN-process in complex development processes	02.11.2012
Dr.-Ing. Martin Schottmüller		Ein Ansatz zur dynamischen Charakterisierung und Bewertung von nichtlinearen Schwingungssystemen anhand des Beispiels Fliehkraftpendel	23.06.2021
Dr.-Ing. Tassilo Schröder		Investigation of the rotational vibration response of human hand-arm systems in the context of user-centered product development
Dr.-Ing. Jens Schröter		The advanced X-in-the-Loop-Framework to fully integrate optimisation procedures in the product development process exemplified by the development of energy efficient vehicles	17.06.2013
Dr.- Ing. Florian Schuchter		11.12.2024	Methoden des maschinellen Lernens in der Funktionsentwicklung von hybriden Fahrzeuggetrieben am Beispiel des Doppelkupplungsgetriebes
Dr.-Ing. Dirk Schweinberger		A methodology to support the search and choice of partners for cooperative projects on product innovation	15.07.2002
Dr.-Ing. Christian Schyr		Model-based methods for the validation phase in the product development process of mechatronic systems exemplified by the powertrain development	21.02.2006
Dr.-Ing. Korkiat Sedchaicharn		A computer-aided method to determine the product architecture with integrated regard to function and design	24.06.2010
Dr.-Ing. Hermann Sommer Obando		Reinforcement Learning Framework for the self-learning suppression of Clutch Judder in automotive Drive Trains	26.04.2016
Dr.-Ing. Gernot Spiegelberg		A contribution to increase the road safety and functionality of vehicles by incorporating the powertrain module MOTion X-ACT	05.02.2002
Dr.-Ing. Tobias Stürmlinger
Dr.-Ing. Michael Steck
Dr.-Ing. Steffen Jäger		A study for validation in the product development by example of the development of a new investigation method for Squeeze Film Damper	14.06.2014
Dr.-Ing. Marcus Stegmiller		Methodik zur Modellierung robuster Teilzielsysteme für Gewicht in der Automobilindustrie
Dr.-Ing. Andreas Stuffer		Prototype of a continuously variable transmission (CVT) for the potential calculation of engineering ceramic materials in lubricated friction systems	13.07.2007
Dr.-Ing. Carolin Sturm
Dr.-Ing. Narucha Tanaiutchawoot		Entwicklung einer Methodik zur Unterstützung der Entscheidungsfindung auf der Grundlage heuristischer Entscheidungen in der Produktentwicklung und im Innovationsmanagement
Dr.-Ing. Tarak Turki		Significance of practical knowledge in the product development and approaches to evaluate and transfer it by example of student groups	17.06.2014
Dr.-Ing. Sebastian Thau		A contribution to analysing of technical systems with the C&C²-approach on the basis of development projects in the industrial environment	25.06.2013
Dr.-Ing. Thomas Freudenmann		Ontologies to validate products based on the Contact & Channel approach (C&C²-A)	30.06.2014
Dr.-Ing. Daniela Troll		Optimising of long-fire-reinforced structures while taking into account the dispersive properties and the robustness of the material	30.11.2015
Dr.-Ing. Markos Troulis		Transmission behaviour of wheel suspension for passenger cars in the comfort-relevant frequency range. Simulation model, experimental investigations, and concepts for a test facility	09.07.2002
Dr.-Ing. Michael Uhl
Dr.-Ing. Jan-Michael Veith		Prädiktion der Belastungskenngrößen von Bauteilen eines Fahrzeugantriebstrangs in Kurzzeitfestigkeitstests auf der Basis von Referenzmessdaten	01.04.2022
Dr.-Ing. Vladimir Vesselinov		Three-dimensional simulation of dynamic of roller bearings	03.02.2003
Dr.-Ing. Moritz Wäschle		Ein Beitrag zur durchgängigen und kontinuierlichen Validierung für die Funktionale Sicherheit von Vehicle-to-Infrastructure als System of Systems durch MBSE-Unterstützung auf Basis des IPEK-XiL-Ansatzes	31.05.2024
Dr.-Ing. Daniel Wagner		Method-based development of an electric energy storage system to explore the potential of lightweight design as a contribution to Product Generation Engineering	30.11.2015
Dr.-Ing. Markus Walch		Variant development in the ZHO model in the context of PGE - Product generation development - Method for decision support during concept development in the offer phase based on derived variants	24.07.2017
Dr.-Ing. Knut Wantzen		Methode zur Entwicklung merkmalsbasierter Zustandsüberwachungssysteme mittels der Körperschallmesstechnik	09.03.2020
Dr.-Ing. Andreas Wettstein		Analyse und Simulation tangential-schlagender Anziehprozesse Ein tribologisches Simulationsmodell zur Beschreibung von Schraubenanziehverfahren	14.06.2021
Dr.-Ing. Aaron Wiedner		A field study to identify the behaviour patterns practised by engineers in the function-embodiment-synthesis	25.06.2013
Dr.-Ing. Miriam Wilmsen		Ansatz zur Entwicklung von SOLL-Prozess Baukästen für die Instanziierung und Konfiguration von SOLL-Prozess Vorschlägen in der automobilen Vorentwicklung	01.04.2022
Dr.-Ing. Wolfgang Pflieger		A methodical approach to modular design of powertrain components in the development process of hybrid vehicles	16.04.2015
Dr.-Ing. Kai Wolter
Dr.-Ing. Steven Yan		Vernetzte Validierungsumgebungen - Ein Beitrag zur Validierung im verteilten Produktentwicklungsumfeld auf Basis des IPEK-X-in-the-Loop-Ansatzes am Beispiel der Antriebssystementwicklung
Dr.-Ing. Yin You		A study on the implementation of the IPEK-X-in-the-loop approach in distributed vehicle development using powertrain development as an example	13.12.2017
Dr.-Ing. Valentin Zimmermann		Methods of initial target system development to support the handling of market uncertainties in the development of plant fire protection in the model of PGE - product generation development.	27.03.2023
Dr.-Ing. Christian Zingel		Base definition for a common language in product development in the context of model design of technical systems and a modelling technique for a system of objectives	18.10.2013
Dr.-Ing. Alexander Zschocke		A contribution to assess objectively as well as subjectively the steering comfort of vehicles	28.04.2009